Pascal started it all!
|SPClimit.exe||A program that generates pre-control chart limits from print specifications for both 3sigma and 4sigma capability. Good when you are starting machine capability studies so the charts will have meaningful limits from the "get-go" for the operators.|
|SPC.zip||Above program with QB4.5 source (.bas) and object (.obj) files. PKunzip, Winzip, or similar utility required to unpack.|
|SPC.mcd||Above zip file with .zip extension changed to .mcd to get it past firewalls|
c_sub_pk.exe A program that calculates your c_sb_pk capability after you have determined your machine capability c_sub_pk.zip Above program with QB4.5 source (.bas) and object (.obj) files. PKunzip, Winzip, or similar utility required to unpack. c_sub-pk.mcd Above zip file with .zip extension changed to .mcd to get it past firewalls
|keirsey3.exe||A Meyers-Briggs type survey to determine personality "types." My experience and voluminous research shows that different M-B/Keirsey personality types have very different concerns/questions when significant organizational changes occur, such as the introduction of Statistical Process Control. One factor is the difficulty different personality types have in communicating non-verbally and in the way they process and internalize/integrate new information.|
|keirsey3.zip||Above program with QB4.5 source (.bas) and object (.obj) files. PKunzip, Winzip, or similar utility required to unpack.|
|keirsey3.mcd||Above zip file with .zip extension changed to .mcd to get it past firewalls|
|http://members.aol.com/johnp71/javasta2.html||Free and shareware general stat and SPC programs|
|http://www.psychstat.missouristate.edu/introbook/sbk11m.htm||Intro to statistics & more than you need to know|
|http://www.nationmaster.com/encyclopedia/Statistical_analysis||General in-depth background info -- also more than you want/need to know|
|http://www.mathtools.net/Excel/Statistics/||If you already know Excel, try these|
|Source code, include files, and exe files for programs that will convert an Autocad v11 or Autocad V12 [seperate programs] ADI plotter output file into G code. This is 2D only. Also includes a utility to convert a HPGL [*NOT* HPGL/2] file into ADI v 11 format so you can use with any program that will ouput a HPGL file. Programs included to generate programs for Emco F1, Bridgeport BOSS, Hurco, General Numerics and Allen Bradley controller for a water jet. Graphical back plotter for Emco F1 files included. Allows use of TrueType fonts. You will need to use the off-set command to generate correct tool path based on your cutter diameter.|
|Autocad LISP files -- works with all versions of autocad I have tried and IntelliCAD 22.214.171.124. Uses the snap command to locate start/end points of arcs, line intersections, etc. and prints the x/y location of the point. One version puts a donut w/ leader line, the other just a leader line. You will need to move the part in paper space so the origin of the part 0,0 is at 0,0. All dimensions are absolute from that point. Version for lathe that exchanges x/y values included. All versions invoked by <cnc> at the :prompt although the files have different names. Only the last loaded file will be active.|
|EIA to ASCII and ASCII to EIA data file
converters. Simple table look-up. Can be "hacked" to
convert any 128 bit/ 1 byte character to any other 128 bit/1 byte
Good for Bridgeport BOSS controllers [EIA based] if you want to used ASCII editing tools.
qb4.5 source, and compiled, ready to run (exe) files included.
|I have a bunch more -- what do you need?|
this page has been accessed times
copyright © 2005 McDuffee Associates
last updated 2014/05/27 by GmcD